Tag Archives: machinery china

China Good quality Zs Factory Price High Precision Oldham Shaft Coupling for Automation Machinery oldham coupling

Product Description

Introduction 

  • Oldham couplings are a 3 piece design comprised of 2 aluminum hubs press fit CHINAMFG a center disk. Torque transmission is accomplished by mating the slots on the center disk to the drive tenons on the hubs. During operation the center disk slides on the tenons of each hub (which are orientated 90 apart) to transmit torque.
  • While the couplings accommodate a small amount of angular and axial misalignment, they are especially useful in applications with parallel misalignment.
  • We offers oldham couplings in set screw or clamp styles with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp style, keyed, or keyless) are interchangeable and can be combined into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for improved lubricity, increased life, and low inertia. Hubs are also available in stainless steel CHINAMFG request for increased corrosion resistance.

Application

  • Ideal for many light duty industrial and motion control applications, oldham couplings have the ability to protect more expensive machinery components.
  • For example the oldham coupling acts as a torque limiter during overload. When the disk fails, it breaks cleanly and does not allow any transmission of power.
  • Oldham couplings also have the advantage of electrical isolation due to the non-conductive nature of the center disk.
  • This prevents electrical currents from being passed to delicate instruments which can cause inaccurate data readings or damage.

Feature

  • High absorption capacity of radial misaligment
  • They do not produce kinematic errors in transmission
  • Elimination of loads on shaft
  • Mechanical protection against excessive torque
  • Replaceable disc

1. We have first-class testing equipment to detect linear guide various data parameters and control the quality of the linear guide.Whenever linear guides must first detected whether the quality is qualified and the unqualified linear guide will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.

2. We have our own R & D capabilities, to help customers solve the problem of non-standard linear guides.We can also according to customer requirements change their own mark.

3. Price, our manufacture ensure that our prices across China are quite competitive.It is better for you to compare prices and quality among suppliers.But everyone knows you can not buy the highest quality products with the lowest price,but our product is the best quailty if you use equal price.

FAQ:

1. When can I get the quotation ?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

2. How can I get a sample to check your quality ? 
After price confirmed,sample order is available to check our quality.

3. What is your main products ? 
Linear motion systems,like lead screws, flexible coupling,Miniature linear guide rails,ball screws,linear rod shaft,ceramic bearings …etc. But also CNC machining centers and CNC machinable tooling boards.

4. Could you get a better price on your products ?
Yes,you can.We will give the best price on all of the products you need,which can help you to compete other companies in your markets.

5. What is the strength of your company ?
We have a engineer team,who have well experienced on product’s and machine designs.We can help you to solve the problems you meet. 

Welcome to inquiry US! 

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    oldham coupling

    How to Identify Signs of Wear or Damage in an Oldham Coupling?

    Regular inspection of Oldham couplings is essential to ensure their proper functioning and prevent unexpected failures. Here are some signs of wear or damage to look for during the inspection:

    1. Visible Cracks or Deformation: Check the center disc and the hubs for any visible cracks, tears, or deformation. These can be indicators of excessive stress or misalignment.

    2. Abnormal Vibrations: Excessive vibrations during operation may suggest that the coupling is not functioning correctly. It could be due to wear in the center disc or improper installation.

    3. Unusual Noise: Grinding, clicking, or banging noises during equipment operation may indicate that the Oldham coupling is experiencing excessive backlash or misalignment.

    4. Increased Backlash: If there is noticeable play or free movement between the coupling components, it may be a sign of wear in the center disc or worn hubs.

    5. Reduced Performance: A decrease in the performance of the machinery or unexpected issues with power transmission could be indicative of coupling problems.

    6. Abnormal Heating: If the coupling becomes unusually hot during operation, it may suggest friction or misalignment issues.

    7. Excessive Wear on Center Disc: Inspect the center disc for signs of wear, such as grooves, uneven surfaces, or material loss. This may occur over time due to the repeated flexing of the disc.

    8. Lubrication Issues: Improper or inadequate lubrication can lead to increased friction and wear in the coupling components.

    If any of these signs are observed during the inspection, it is essential to address the issue promptly. Depending on the severity of the wear or damage, the Oldham coupling may require replacement or repair. Regular maintenance and proper lubrication can help extend the life of the coupling and prevent unexpected failures, ensuring smooth and reliable operation in the machinery or equipment.

    oldham coupling

    Differences Between Oldham Couplings and Other Types of Flexible Couplings

    Oldham couplings are a type of flexible coupling used in mechanical systems to transmit torque between two shafts. Here are some key differences between Oldham couplings and other types of flexible couplings:

    • Mechanism of Torque Transmission: Oldham couplings use a sliding motion between the center disc and the hubs to transmit torque. The center disc has slots that engage with pins on the hubs, allowing for torque transmission while accommodating misalignment. In contrast, other flexible couplings, such as jaw couplings or beam couplings, typically use elastic materials or flexible elements like rubber or springs to transmit torque.
    • Misalignment Compensation: Oldham couplings are specifically designed to handle angular misalignment between shafts. They can accommodate parallel misalignment to a limited extent but are not well-suited for axial misalignment. Other flexible couplings like beam couplings or bellows couplings may offer more comprehensive misalignment compensation, including axial misalignment.
    • Backlash: Oldham couplings have a small amount of backlash due to the clearance between the center disc and the hubs. This backlash can be beneficial in some applications to reduce shock loads and vibrations. However, other flexible couplings like beam couplings or jaw couplings may have minimal or zero backlash.
    • Construction and Materials: Oldham couplings are typically made of materials like aluminum for the hubs and center disc, and acetal or other plastics for the center disc’s sliding parts. Other flexible couplings come in various materials, including aluminum, stainless steel, elastomers, and composite materials, depending on the application’s requirements.
    • Operating Speed: Oldham couplings are suitable for moderate to high rotational speeds, but their speed limitations depend on the material and design. Some other flexible couplings, such as bellows couplings, can handle even higher speeds due to their construction.
    • Applications: Oldham couplings are commonly used in applications that require moderate torque transmission and angular misalignment compensation, such as pumps, packaging machines, and automation equipment. Other flexible couplings are used in a wide range of applications, including motion control systems, robotics, aerospace, and automotive industries, where specific coupling characteristics are needed.

    Choosing the right flexible coupling depends on the specific requirements of the application, including torque, misalignment, speed, space constraints, and environmental conditions. Engineers and designers should carefully consider these factors to select the most appropriate coupling for their mechanical system.

    oldham coupling

    What is an Oldham Coupling and How Does It Function in Mechanical Systems?

    An Oldham coupling is a type of flexible coupling used in mechanical systems to transmit torque between two shafts that are misaligned. It consists of three main components: two hubs or discs and a middle block. The two hubs are connected to the respective shafts, and the middle block sits in between them.

    The key feature of the Oldham coupling is the middle block, which has slots on its opposite faces and is connected to the hubs using pins or keys. The slots in the middle block are oriented perpendicular to each other, allowing the middle block to move in a plane perpendicular to the axis of the shafts.

    When torque is applied to one shaft, it is transmitted to the middle block of the coupling. Due to the slots, the middle block can slide laterally as the shafts rotate, accommodating both angular and axial misalignments between the shafts. This sliding action helps to reduce the reaction forces and wear that would otherwise occur in rigid couplings when misalignment is present.

    Oldham couplings are known for their ability to provide constant velocity transmission even when misalignment exists. They do not have any backlash, which means there is minimal play between the coupling components during rotation. This feature makes them suitable for precision applications where accurate torque transmission and positioning are required.

    One of the main advantages of the Oldham coupling is that it effectively isolates the connected shafts from each other, which can help in reducing vibrations and noise. Additionally, it can compensate for parallel misalignment between the shafts, making it ideal for applications where parallel shafts need to be connected while allowing some degree of misalignment.

    Oldham couplings are commonly used in various industrial machinery and automation systems, including CNC machines, robotics, printing presses, and conveyor systems. They are particularly useful in applications where precise torque transmission, misalignment compensation, and low maintenance are essential.

    China Good quality Zs Factory Price High Precision Oldham Shaft Coupling for Automation Machinery  oldham couplingChina Good quality Zs Factory Price High Precision Oldham Shaft Coupling for Automation Machinery  oldham coupling
    editor by CX 2024-05-17

    China best Zs Factory Price High Precision Oldham Shaft Coupling for Automation Machinery oldham coupling

    Product Description

    Introduction 

    • Oldham couplings are a 3 piece design comprised of 2 aluminum hubs press fit CHINAMFG a center disk. Torque transmission is accomplished by mating the slots on the center disk to the drive tenons on the hubs. During operation the center disk slides on the tenons of each hub (which are orientated 90 apart) to transmit torque.
    • While the couplings accommodate a small amount of angular and axial misalignment, they are especially useful in applications with parallel misalignment.
    • We offers oldham couplings in set screw or clamp styles with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp style, keyed, or keyless) are interchangeable and can be combined into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for improved lubricity, increased life, and low inertia. Hubs are also available in stainless steel CHINAMFG request for increased corrosion resistance.

    Application

    • Ideal for many light duty industrial and motion control applications, oldham couplings have the ability to protect more expensive machinery components.
    • For example the oldham coupling acts as a torque limiter during overload. When the disk fails, it breaks cleanly and does not allow any transmission of power.
    • Oldham couplings also have the advantage of electrical isolation due to the non-conductive nature of the center disk.
    • This prevents electrical currents from being passed to delicate instruments which can cause inaccurate data readings or damage.

    Feature

    • High absorption capacity of radial misaligment
    • They do not produce kinematic errors in transmission
    • Elimination of loads on shaft
    • Mechanical protection against excessive torque
    • Replaceable disc

    1. We have first-class testing equipment to detect linear guide various data parameters and control the quality of the linear guide.Whenever linear guides must first detected whether the quality is qualified and the unqualified linear guide will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.

    2. We have our own R & D capabilities, to help customers solve the problem of non-standard linear guides.We can also according to customer requirements change their own mark.

    3. Price, our manufacture ensure that our prices across China are quite competitive.It is better for you to compare prices and quality among suppliers.But everyone knows you can not buy the highest quality products with the lowest price,but our product is the best quailty if you use equal price.

    FAQ:

    1. When can I get the quotation ?
    We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

    2. How can I get a sample to check your quality ? 
    After price confirmed,sample order is available to check our quality.

    3. What is your main products ? 
    Linear motion systems,like lead screws, flexible coupling,Miniature linear guide rails,ball screws,linear rod shaft,ceramic bearings …etc. But also CNC machining centers and CNC machinable tooling boards.

    4. Could you get a better price on your products ?
    Yes,you can.We will give the best price on all of the products you need,which can help you to compete other companies in your markets.

    5. What is the strength of your company ?
    We have a engineer team,who have well experienced on product’s and machine designs.We can help you to solve the problems you meet. 

    Welcome to inquiry US! 

      /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

      oldham coupling

      What are the Potential Limitations or Drawbacks of Using an Oldham Coupling?

      While Oldham couplings offer numerous advantages, they also have some limitations and drawbacks that should be considered when selecting a coupling for a specific application:

      1. Limited Misalignment Capacity: Oldham couplings can only accommodate small amounts of angular and axial misalignment between the shafts. They are not suitable for applications with high levels of misalignment as excessive misalignment can lead to premature wear and failure of the center disc.

      2. Speed Limitations: Oldham couplings are generally not recommended for high-speed applications. The flexible center disc has a maximum speed limit, and exceeding this limit can cause the disc to fatigue and fail over time.

      3. Temperature Sensitivity: The performance of Oldham couplings can be affected by temperature fluctuations. Extreme temperatures can impact the flexibility and integrity of the center disc material, leading to reduced coupling performance.

      4. Backlash in High-Precision Systems: While Oldham couplings minimize backlash compared to some other couplings, they may still have some inherent clearance between the hubs and the center disc, leading to a slight amount of backlash. In ultra-high-precision systems, this slight backlash may be a concern.

      5. Material Compatibility: The material used for the center disc must be chosen carefully to ensure compatibility with the specific application’s environment and the media being conveyed. Some aggressive chemicals or harsh environments may degrade the material over time.

      6. Maintenance: Oldham couplings require periodic inspection and maintenance to ensure proper functioning. The center disc may wear out over time and need replacement, especially in applications with high torque or frequent start-stop cycles.

      Despite these limitations, Oldham couplings remain a popular choice in many applications due to their vibration reduction, backlash minimization, and moderate misalignment compensation capabilities. However, it is essential to carefully assess the specific requirements of the application and consider the potential drawbacks before selecting an Oldham coupling.

      oldham coupling

      How to Calculate the Required Size and Specifications for an Oldham Coupling

      Calculating the required size and specifications for an Oldham coupling involves considering several key factors. Here’s a step-by-step guide to help you with the calculations:

      1. Identify the Torque Requirements: Determine the maximum torque that the coupling needs to transmit between the two shafts. This can be done by analyzing the torque demands of the application and considering safety factors.
      2. Select the Coupling Material: Based on the operating conditions and the type of machinery, choose a suitable material for the Oldham coupling. Common materials include aluminum, stainless steel, and acetal.
      3. Calculate the Bore Diameter: Measure the diameters of the shafts that the coupling will connect. The bore diameter of the coupling should match the shaft diameters for a proper fit.
      4. Determine the Coupling Size: The coupling’s size is typically specified by its outside diameter and length. Ensure that the selected coupling size fits within the available space in the mechanical system.
      5. Consider Misalignment Compensation: Oldham couplings can accommodate angular misalignment. However, it’s essential to check the coupling’s rated misalignment capability to ensure it meets the application’s requirements.
      6. Check Operating Speed: Verify that the selected coupling can handle the rotational speed (RPM) of the application without exceeding its critical speed.
      7. Factor in Environmental Conditions: If the coupling will be exposed to harsh environmental conditions or corrosive substances, choose a material that can withstand these conditions.

      Once you have gathered all the necessary information and made the calculations, you can select the appropriate Oldham coupling that meets the requirements of your specific application. It’s important to consult with coupling manufacturers or engineering experts to ensure the coupling’s compatibility and reliability in your system.

      oldham coupling

      Materials Used in Manufacturing Oldham Couplings

      Oldham couplings are commonly made from various materials to suit different application requirements. The choice of material depends on factors such as torque capacity, operating conditions, and environmental considerations. Some of the commonly used materials in manufacturing Oldham couplings include:

      • Aluminum: Aluminum is a popular choice for Oldham couplings due to its lightweight and excellent machinability. It is suitable for low to medium torque applications and offers good corrosion resistance.
      • Stainless Steel: Stainless steel is known for its high strength, corrosion resistance, and durability. Oldham couplings made from stainless steel are ideal for applications requiring higher torque transmission and operating in harsh or corrosive environments.
      • Acetal: Acetal, also known as Delrin, is a thermoplastic material with good mechanical properties. It provides low friction and wear resistance, making it suitable for applications where reduced friction is essential.
      • Nylon: Nylon is another thermoplastic material used in Oldham couplings. It offers good chemical resistance and is often chosen for applications with moderate torque requirements.
      • Carbon Steel: Carbon steel is robust and cost-effective, making it suitable for heavy-duty applications. It has high strength and can handle higher torque loads compared to some other materials.
      • Brass: Brass is a durable metal that offers good corrosion resistance. Oldham couplings made from brass are suitable for certain industrial and marine applications.

      The material selection for an Oldham coupling depends on factors such as the torque to be transmitted, operating speed, environmental conditions, and budget constraints. Manufacturers often offer a range of material options to meet the diverse needs of different industries and applications.

      China best Zs Factory Price High Precision Oldham Shaft Coupling for Automation Machinery  oldham couplingChina best Zs Factory Price High Precision Oldham Shaft Coupling for Automation Machinery  oldham coupling
      editor by CX 2024-05-09

      China factory Zs Factory Price High Precision Oldham Flexible Couplings for Automation Machinery oldham coupling

      Product Description

      Introduction 

      • Oldham couplings are a 3 piece design comprised of 2 aluminum hubs press fit CHINAMFG a center disk. Torque transmission is accomplished by mating the slots on the center disk to the drive tenons on the hubs. During operation the center disk slides on the tenons of each hub (which are orientated 90 apart) to transmit torque.
      • While the couplings accommodate a small amount of angular and axial misalignment, they are especially useful in applications with parallel misalignment.
      • We offers oldham couplings in set screw or clamp styles with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp style, keyed, or keyless) are interchangeable and can be combined into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for improved lubricity, increased life, and low inertia. Hubs are also available in stainless steel CHINAMFG request for increased corrosion resistance.

      Application

      • Ideal for many light duty industrial and motion control applications, oldham couplings have the ability to protect more expensive machinery components.
      • For example the oldham coupling acts as a torque limiter during overload. When the disk fails, it breaks cleanly and does not allow any transmission of power.
      • Oldham couplings also have the advantage of electrical isolation due to the non-conductive nature of the center disk.
      • This prevents electrical currents from being passed to delicate instruments which can cause inaccurate data readings or damage.

      Feature

      • High absorption capacity of radial misaligment
      • They do not produce kinematic errors in transmission
      • Elimination of loads on shaft
      • Mechanical protection against excessive torque
      • Replaceable disc

      1. We have first-class testing equipment to detect linear guide various data parameters and control the quality of the linear guide.Whenever linear guides must first detected whether the quality is qualified and the unqualified linear guide will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.

      2. We have our own R & D capabilities, to help customers solve the problem of non-standard linear guides.We can also according to customer requirements change their own mark.

      3. Price, our manufacture ensure that our prices across China are quite competitive.It is better for you to compare prices and quality among suppliers.But everyone knows you can not buy the highest quality products with the lowest price,but our product is the best quailty if you use equal price.

      FAQ:

      1. When can I get the quotation ?
      We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

      2. How can I get a sample to check your quality ? 
      After price confirmed,sample order is available to check our quality.

      3. What is your main products ? 
      Linear motion systems,like lead screws, flexible coupling,Miniature linear guide rails,ball screws,linear rod shaft,ceramic bearings …etc. But also CNC machining centers and CNC machinable tooling boards.

      4. Could you get a better price on your products ?
      Yes,you can.We will give the best price on all of the products you need,which can help you to compete other companies in your markets.

      5. What is the strength of your company ?
      We have a engineer team,who have well experienced on product’s and machine designs.We can help you to solve the problems you meet. 

      Welcome to inquiry US! 

        /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

        oldham coupling

        What are the Potential Limitations or Drawbacks of Using an Oldham Coupling?

        While Oldham couplings offer numerous advantages, they also have some limitations and drawbacks that should be considered when selecting a coupling for a specific application:

        1. Limited Misalignment Capacity: Oldham couplings can only accommodate small amounts of angular and axial misalignment between the shafts. They are not suitable for applications with high levels of misalignment as excessive misalignment can lead to premature wear and failure of the center disc.

        2. Speed Limitations: Oldham couplings are generally not recommended for high-speed applications. The flexible center disc has a maximum speed limit, and exceeding this limit can cause the disc to fatigue and fail over time.

        3. Temperature Sensitivity: The performance of Oldham couplings can be affected by temperature fluctuations. Extreme temperatures can impact the flexibility and integrity of the center disc material, leading to reduced coupling performance.

        4. Backlash in High-Precision Systems: While Oldham couplings minimize backlash compared to some other couplings, they may still have some inherent clearance between the hubs and the center disc, leading to a slight amount of backlash. In ultra-high-precision systems, this slight backlash may be a concern.

        5. Material Compatibility: The material used for the center disc must be chosen carefully to ensure compatibility with the specific application’s environment and the media being conveyed. Some aggressive chemicals or harsh environments may degrade the material over time.

        6. Maintenance: Oldham couplings require periodic inspection and maintenance to ensure proper functioning. The center disc may wear out over time and need replacement, especially in applications with high torque or frequent start-stop cycles.

        Despite these limitations, Oldham couplings remain a popular choice in many applications due to their vibration reduction, backlash minimization, and moderate misalignment compensation capabilities. However, it is essential to carefully assess the specific requirements of the application and consider the potential drawbacks before selecting an Oldham coupling.

        oldham coupling

        Real-World Examples of Oldham Coupling Usage in Mechanical Engineering

        Oldham couplings are widely used in various mechanical engineering applications due to their ability to transmit torque while compensating for angular misalignment. Here are some real-world examples of Oldham coupling usage:

        • Packaging Machinery: Oldham couplings are commonly employed in packaging machines that require precise and continuous motion. These couplings help connect the motor shaft to various components in the packaging process, such as conveyor belts, rollers, and cutting blades.
        • Automated Assembly Lines: In automated assembly lines, Oldham couplings are utilized to transfer torque from the motor to the robotic arms or handling mechanisms. The couplings enable smooth and accurate movement, ensuring precise positioning of components during assembly.
        • Printing Equipment: Printing machines utilize Oldham couplings to transmit power from the motors to the printing cylinders and rollers. The couplings accommodate any misalignment between the shafts and minimize vibration, resulting in improved print quality.
        • Material Handling Systems: Material handling systems, such as conveyor systems, use Oldham couplings to connect drive motors to the conveyor belts. These couplings facilitate the efficient transfer of goods while compensating for any misalignment that may occur during operation.
        • Industrial Pumps: Oldham couplings are employed in industrial pumps to transfer power from the motor to the pump impeller. They aid in absorbing vibration and maintaining alignment, which is crucial for the pump’s optimal performance and longevity.
        • Medical Devices: Some medical devices, such as scanning equipment and diagnostic machines, incorporate Oldham couplings to ensure precise and reliable motion, contributing to accurate medical imaging and diagnosis.

        These examples demonstrate the versatility of Oldham couplings in various mechanical engineering applications. Their ability to handle misalignment, reduce vibration, and transmit torque makes them a valuable component in many industrial sectors.

        oldham coupling

        Materials Used in Manufacturing Oldham Couplings

        Oldham couplings are commonly made from various materials to suit different application requirements. The choice of material depends on factors such as torque capacity, operating conditions, and environmental considerations. Some of the commonly used materials in manufacturing Oldham couplings include:

        • Aluminum: Aluminum is a popular choice for Oldham couplings due to its lightweight and excellent machinability. It is suitable for low to medium torque applications and offers good corrosion resistance.
        • Stainless Steel: Stainless steel is known for its high strength, corrosion resistance, and durability. Oldham couplings made from stainless steel are ideal for applications requiring higher torque transmission and operating in harsh or corrosive environments.
        • Acetal: Acetal, also known as Delrin, is a thermoplastic material with good mechanical properties. It provides low friction and wear resistance, making it suitable for applications where reduced friction is essential.
        • Nylon: Nylon is another thermoplastic material used in Oldham couplings. It offers good chemical resistance and is often chosen for applications with moderate torque requirements.
        • Carbon Steel: Carbon steel is robust and cost-effective, making it suitable for heavy-duty applications. It has high strength and can handle higher torque loads compared to some other materials.
        • Brass: Brass is a durable metal that offers good corrosion resistance. Oldham couplings made from brass are suitable for certain industrial and marine applications.

        The material selection for an Oldham coupling depends on factors such as the torque to be transmitted, operating speed, environmental conditions, and budget constraints. Manufacturers often offer a range of material options to meet the diverse needs of different industries and applications.

        China factory Zs Factory Price High Precision Oldham Flexible Couplings for Automation Machinery  oldham couplingChina factory Zs Factory Price High Precision Oldham Flexible Couplings for Automation Machinery  oldham coupling
        editor by CX 2024-04-13

        China manufacturer Zs Factory Price High Precision Oldham Type Flexible Couplings for Automation Machinery oldham coupling

        Product Description

        Introduction 

        • Oldham couplings are a 3 piece design comprised of 2 aluminum hubs press fit CHINAMFG a center disk. Torque transmission is accomplished by mating the slots on the center disk to the drive tenons on the hubs. During operation the center disk slides on the tenons of each hub (which are orientated 90 apart) to transmit torque.
        • While the couplings accommodate a small amount of angular and axial misalignment, they are especially useful in applications with parallel misalignment.
        • We offers oldham couplings in set screw or clamp styles with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp style, keyed, or keyless) are interchangeable and can be combined into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for improved lubricity, increased life, and low inertia. Hubs are also available in stainless steel CHINAMFG request for increased corrosion resistance.

        Application

        • Ideal for many light duty industrial and motion control applications, oldham couplings have the ability to protect more expensive machinery components.
        • For example the oldham coupling acts as a torque limiter during overload. When the disk fails, it breaks cleanly and does not allow any transmission of power.
        • Oldham couplings also have the advantage of electrical isolation due to the non-conductive nature of the center disk.
        • This prevents electrical currents from being passed to delicate instruments which can cause inaccurate data readings or damage.

        Feature

        • High absorption capacity of radial misaligment
        • They do not produce kinematic errors in transmission
        • Elimination of loads on shaft
        • Mechanical protection against excessive torque
        • Replaceable disc

        1. We have first-class testing equipment to detect linear guide various data parameters and control the quality of the linear guide.Whenever linear guides must first detected whether the quality is qualified and the unqualified linear guide will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.

        2. We have our own R & D capabilities, to help customers solve the problem of non-standard linear guides.We can also according to customer requirements change their own mark.

        3. Price, our manufacture ensure that our prices across China are quite competitive.It is better for you to compare prices and quality among suppliers.But everyone knows you can not buy the highest quality products with the lowest price,but our product is the best quailty if you use equal price.

        FAQ:

        1. When can I get the quotation ?
        We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

        2. How can I get a sample to check your quality ? 
        After price confirmed,sample order is available to check our quality.

        3. What is your main products ? 
        Linear motion systems,like lead screws, flexible coupling,Miniature linear guide rails,ball screws,linear rod shaft,ceramic bearings …etc. But also CNC machining centers and CNC machinable tooling boards.

        4. Could you get a better price on your products ?
        Yes,you can.We will give the best price on all of the products you need,which can help you to compete other companies in your markets.

        5. What is the strength of your company ?
        We have a engineer team,who have well experienced on product’s and machine designs.We can help you to solve the problems you meet. 

        Welcome to inquiry US! 

          /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

          oldham coupling

          Specific Safety Considerations for Using Oldham Couplings in High-Speed Applications

          When using Oldham couplings in high-speed applications, there are several safety considerations to keep in mind to ensure the safe and efficient operation of the machinery:

          1. Material Selection: Choose high-quality materials for the Oldham coupling components to withstand the stresses and forces experienced at high speeds.

          2. Proper Installation: Ensure the coupling is installed correctly and securely to prevent any chances of coupling failure or disengagement during high-speed operation.

          3. Balancing: Balance the coupling components accurately to minimize vibration and prevent excessive wear, which can be more pronounced at high speeds.

          4. Regular Inspections: Implement a regular inspection and maintenance schedule to identify any signs of wear, misalignment, or damage that may occur due to high-speed operation.

          5. Lubrication: Use appropriate lubrication to reduce friction and heat generation, which is crucial in high-speed applications.

          6. Temperature Consideration: Monitor the temperature of the coupling during operation as high speeds can result in increased heat generation.

          7. Avoid Overloading: Do not exceed the recommended torque and speed limits specified by the manufacturer to avoid overloading the coupling.

          8. Coupling Guards: Consider using coupling guards or covers to protect personnel from rotating or moving coupling components in high-speed systems.

          9. Emergency Shutdown: Install an emergency shutdown system to quickly stop the machinery in case of coupling failure or other emergencies.

          10. Compliance with Standards: Ensure that the Oldham coupling and its installation comply with industry standards and regulations for high-speed applications.

          By adhering to these safety considerations and implementing preventive measures, the risk of accidents, machinery damage, and downtime in high-speed applications can be significantly reduced. Always consult the coupling manufacturer’s guidelines and follow best practices for safe operation and maintenance.

          oldham coupling

          Can an Oldham Coupling be Used in Precision Motion Control Applications?

          Yes, an Oldham coupling can be used in precision motion control applications. Oldham couplings are known for their ability to provide constant velocity transmission while accommodating misalignment. These couplings offer low backlash and minimal hysteresis, making them suitable for precision motion control systems.

          Precision motion control applications require accurate and repeatable motion, which can be achieved by using an Oldham coupling. The coupling’s design allows it to handle angular misalignment without introducing significant axial or radial forces. This feature helps maintain the accuracy and integrity of the motion control system.

          Oldham couplings are often used in applications such as robotics, CNC machines, optical equipment, and other systems where precise positioning and smooth motion are essential. Their ability to reduce vibration and minimize backlash is particularly beneficial in these applications, as it enhances the system’s overall performance and accuracy.

          When selecting an Oldham coupling for precision motion control, it is essential to consider factors such as the required torque capacity, speed, and shaft sizes. Additionally, regular maintenance and proper alignment are crucial to ensure the coupling’s optimal performance in precision applications.

          oldham coupling

          What is an Oldham Coupling and How Does It Function in Mechanical Systems?

          An Oldham coupling is a type of flexible coupling used in mechanical systems to transmit torque between two shafts that are misaligned. It consists of three main components: two hubs or discs and a middle block. The two hubs are connected to the respective shafts, and the middle block sits in between them.

          The key feature of the Oldham coupling is the middle block, which has slots on its opposite faces and is connected to the hubs using pins or keys. The slots in the middle block are oriented perpendicular to each other, allowing the middle block to move in a plane perpendicular to the axis of the shafts.

          When torque is applied to one shaft, it is transmitted to the middle block of the coupling. Due to the slots, the middle block can slide laterally as the shafts rotate, accommodating both angular and axial misalignments between the shafts. This sliding action helps to reduce the reaction forces and wear that would otherwise occur in rigid couplings when misalignment is present.

          Oldham couplings are known for their ability to provide constant velocity transmission even when misalignment exists. They do not have any backlash, which means there is minimal play between the coupling components during rotation. This feature makes them suitable for precision applications where accurate torque transmission and positioning are required.

          One of the main advantages of the Oldham coupling is that it effectively isolates the connected shafts from each other, which can help in reducing vibrations and noise. Additionally, it can compensate for parallel misalignment between the shafts, making it ideal for applications where parallel shafts need to be connected while allowing some degree of misalignment.

          Oldham couplings are commonly used in various industrial machinery and automation systems, including CNC machines, robotics, printing presses, and conveyor systems. They are particularly useful in applications where precise torque transmission, misalignment compensation, and low maintenance are essential.

          China manufacturer Zs Factory Price High Precision Oldham Type Flexible Couplings for Automation Machinery  oldham couplingChina manufacturer Zs Factory Price High Precision Oldham Type Flexible Couplings for Automation Machinery  oldham coupling
          editor by CX 2024-01-09

          China Good quality Zs Factory Price High Precision Oldham Flexible Couplings for Automation Machinery oldham coupling

          Product Description

          Introduction 

          • Oldham couplings are a 3 piece design comprised of 2 aluminum hubs press fit CZPT a center disk. Torque transmission is accomplished by mating the slots on the center disk to the drive tenons on the hubs. During operation the center disk slides on the tenons of each hub (which are orientated 90 apart) to transmit torque.
          • While the couplings accommodate a small amount of angular and axial misalignment, they are especially useful in applications with parallel misalignment.
          • We offers oldham couplings in set screw or clamp styles with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp style, keyed, or keyless) are interchangeable and can be combined into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for improved lubricity, increased life, and low inertia. Hubs are also available in stainless steel CZPT request for increased corrosion resistance.

          Application

          • Ideal for many light duty industrial and motion control applications, oldham couplings have the ability to protect more expensive machinery components.
          • For example the oldham coupling acts as a torque limiter during overload. When the disk fails, it breaks cleanly and does not allow any transmission of power.
          • Oldham couplings also have the advantage of electrical isolation due to the non-conductive nature of the center disk.
          • This prevents electrical currents from being passed to delicate instruments which can cause inaccurate data readings or damage.

          Feature

          • High absorption capacity of radial misaligment
          • They do not produce kinematic errors in transmission
          • Elimination of loads on shaft
          • Mechanical protection against excessive torque
          • Replaceable disc

          1. We have first-class testing equipment to detect linear guide various data parameters and control the quality of the linear guide.Whenever linear guides must first detected whether the quality is qualified and the unqualified linear guide will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.

          2. We have our own R & D capabilities, to help customers solve the problem of non-standard linear guides.We can also according to customer requirements change their own mark.

          3. Price, our manufacture ensure that our prices across China are quite competitive.It is better for you to compare prices and quality among suppliers.But everyone knows you can not buy the highest quality products with the lowest price,but our product is the best quailty if you use equal price.

          FAQ:

          1. When can I get the quotation ?
          We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

          2. How can I get a sample to check your quality ? 
          After price confirmed,sample order is available to check our quality.

          3. What is your main products ? 
          Linear motion systems,like lead screws, flexible coupling,Miniature linear guide rails,ball screws,linear rod shaft,ceramic bearings …etc. But also CNC machining centers and CNC machinable tooling boards.

          4. Could you get a better price on your products ?
          Yes,you can.We will give the best price on all of the products you need,which can help you to compete other companies in your markets.

          5. What is the strength of your company ?
          We have a engineer team,who have well experienced on product’s and machine designs.We can help you to solve the problems you meet. 

          Welcome to inquiry US! 

            oldham coupling

            Can an Oldham Coupling Reduce Vibration and Backlash in Mechanical Systems?

            Yes, an Oldham coupling can help reduce vibration and minimize backlash in mechanical systems, making it a popular choice for applications that require precise and smooth power transmission.

            Vibration Reduction: Oldham couplings are designed with a three-piece construction, comprising two hubs and a center disc. The center disc, also known as the spacer, is made of a flexible material such as acetal or nylon. When torque is transmitted through the coupling, the center disc flexes, absorbing any misalignment between the shafts. This flexing action helps dampen vibration and reduces resonance in the system, leading to smoother operation and less mechanical stress on connected components.

            Backlash Minimization: Backlash is the amount of play or free movement between the mating parts of a mechanical system. In traditional couplings like gear couplings, there can be significant backlash due to the nature of the gear teeth. However, Oldham couplings have a unique design that allows them to transmit torque with minimal backlash. The center disc provides a small amount of clearance between the hubs, enabling smooth rotation without backlash. This characteristic is especially beneficial in applications that require precise motion control, such as robotics and CNC machines.

            Overall, the flexible and backlash-free nature of Oldham couplings makes them well-suited for applications where vibration reduction and precise motion control are essential. By reducing vibration and backlash, Oldham couplings contribute to the overall efficiency, accuracy, and reliability of the mechanical system they are employed in.

            oldham coupling

            How to Calculate the Required Size and Specifications for an Oldham Coupling

            Calculating the required size and specifications for an Oldham coupling involves considering several key factors. Here’s a step-by-step guide to help you with the calculations:

            1. Identify the Torque Requirements: Determine the maximum torque that the coupling needs to transmit between the two shafts. This can be done by analyzing the torque demands of the application and considering safety factors.
            2. Select the Coupling Material: Based on the operating conditions and the type of machinery, choose a suitable material for the Oldham coupling. Common materials include aluminum, stainless steel, and acetal.
            3. Calculate the Bore Diameter: Measure the diameters of the shafts that the coupling will connect. The bore diameter of the coupling should match the shaft diameters for a proper fit.
            4. Determine the Coupling Size: The coupling’s size is typically specified by its outside diameter and length. Ensure that the selected coupling size fits within the available space in the mechanical system.
            5. Consider Misalignment Compensation: Oldham couplings can accommodate angular misalignment. However, it’s essential to check the coupling’s rated misalignment capability to ensure it meets the application’s requirements.
            6. Check Operating Speed: Verify that the selected coupling can handle the rotational speed (RPM) of the application without exceeding its critical speed.
            7. Factor in Environmental Conditions: If the coupling will be exposed to harsh environmental conditions or corrosive substances, choose a material that can withstand these conditions.

            Once you have gathered all the necessary information and made the calculations, you can select the appropriate Oldham coupling that meets the requirements of your specific application. It’s important to consult with coupling manufacturers or engineering experts to ensure the coupling’s compatibility and reliability in your system.

            oldham coupling

            What is an Oldham Coupling and How Does It Function in Mechanical Systems?

            An Oldham coupling is a type of flexible coupling used in mechanical systems to transmit torque between two shafts that are misaligned. It consists of three main components: two hubs or discs and a middle block. The two hubs are connected to the respective shafts, and the middle block sits in between them.

            The key feature of the Oldham coupling is the middle block, which has slots on its opposite faces and is connected to the hubs using pins or keys. The slots in the middle block are oriented perpendicular to each other, allowing the middle block to move in a plane perpendicular to the axis of the shafts.

            When torque is applied to one shaft, it is transmitted to the middle block of the coupling. Due to the slots, the middle block can slide laterally as the shafts rotate, accommodating both angular and axial misalignments between the shafts. This sliding action helps to reduce the reaction forces and wear that would otherwise occur in rigid couplings when misalignment is present.

            Oldham couplings are known for their ability to provide constant velocity transmission even when misalignment exists. They do not have any backlash, which means there is minimal play between the coupling components during rotation. This feature makes them suitable for precision applications where accurate torque transmission and positioning are required.

            One of the main advantages of the Oldham coupling is that it effectively isolates the connected shafts from each other, which can help in reducing vibrations and noise. Additionally, it can compensate for parallel misalignment between the shafts, making it ideal for applications where parallel shafts need to be connected while allowing some degree of misalignment.

            Oldham couplings are commonly used in various industrial machinery and automation systems, including CNC machines, robotics, printing presses, and conveyor systems. They are particularly useful in applications where precise torque transmission, misalignment compensation, and low maintenance are essential.

            China Good quality Zs Factory Price High Precision Oldham Flexible Couplings for Automation Machinery  oldham couplingChina Good quality Zs Factory Price High Precision Oldham Flexible Couplings for Automation Machinery  oldham coupling
            editor by CX 2023-08-29

            China Good quality Zs Factory Price High Precision Oldham Shaft Coupling for Automation Machinery oldham coupling

            Product Description

            Introduction 

            • Oldham couplings are a 3 piece design comprised of 2 aluminum hubs press fit CZPT a center disk. Torque transmission is accomplished by mating the slots on the center disk to the drive tenons on the hubs. During operation the center disk slides on the tenons of each hub (which are orientated 90 apart) to transmit torque.
            • While the couplings accommodate a small amount of angular and axial misalignment, they are especially useful in applications with parallel misalignment.
            • We offers oldham couplings in set screw or clamp styles with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp style, keyed, or keyless) are interchangeable and can be combined into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for improved lubricity, increased life, and low inertia. Hubs are also available in stainless steel CZPT request for increased corrosion resistance.

            Application

            • Ideal for many light duty industrial and motion control applications, oldham couplings have the ability to protect more expensive machinery components.
            • For example the oldham coupling acts as a torque limiter during overload. When the disk fails, it breaks cleanly and does not allow any transmission of power.
            • Oldham couplings also have the advantage of electrical isolation due to the non-conductive nature of the center disk.
            • This prevents electrical currents from being passed to delicate instruments which can cause inaccurate data readings or damage.

            Feature

            • High absorption capacity of radial misaligment
            • They do not produce kinematic errors in transmission
            • Elimination of loads on shaft
            • Mechanical protection against excessive torque
            • Replaceable disc

            1. We have first-class testing equipment to detect linear guide various data parameters and control the quality of the linear guide.Whenever linear guides must first detected whether the quality is qualified and the unqualified linear guide will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.

            2. We have our own R & D capabilities, to help customers solve the problem of non-standard linear guides.We can also according to customer requirements change their own mark.

            3. Price, our manufacture ensure that our prices across China are quite competitive.It is better for you to compare prices and quality among suppliers.But everyone knows you can not buy the highest quality products with the lowest price,but our product is the best quailty if you use equal price.

            FAQ:

            1. When can I get the quotation ?
            We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

            2. How can I get a sample to check your quality ? 
            After price confirmed,sample order is available to check our quality.

            3. What is your main products ? 
            Linear motion systems,like lead screws, flexible coupling,Miniature linear guide rails,ball screws,linear rod shaft,ceramic bearings …etc. But also CNC machining centers and CNC machinable tooling boards.

            4. Could you get a better price on your products ?
            Yes,you can.We will give the best price on all of the products you need,which can help you to compete other companies in your markets.

            5. What is the strength of your company ?
            We have a engineer team,who have well experienced on product’s and machine designs.We can help you to solve the problems you meet. 

            Welcome to inquiry US! 

              oldham coupling

              What are the Potential Limitations or Drawbacks of Using an Oldham Coupling?

              While Oldham couplings offer numerous advantages, they also have some limitations and drawbacks that should be considered when selecting a coupling for a specific application:

              1. Limited Misalignment Capacity: Oldham couplings can only accommodate small amounts of angular and axial misalignment between the shafts. They are not suitable for applications with high levels of misalignment as excessive misalignment can lead to premature wear and failure of the center disc.

              2. Speed Limitations: Oldham couplings are generally not recommended for high-speed applications. The flexible center disc has a maximum speed limit, and exceeding this limit can cause the disc to fatigue and fail over time.

              3. Temperature Sensitivity: The performance of Oldham couplings can be affected by temperature fluctuations. Extreme temperatures can impact the flexibility and integrity of the center disc material, leading to reduced coupling performance.

              4. Backlash in High-Precision Systems: While Oldham couplings minimize backlash compared to some other couplings, they may still have some inherent clearance between the hubs and the center disc, leading to a slight amount of backlash. In ultra-high-precision systems, this slight backlash may be a concern.

              5. Material Compatibility: The material used for the center disc must be chosen carefully to ensure compatibility with the specific application’s environment and the media being conveyed. Some aggressive chemicals or harsh environments may degrade the material over time.

              6. Maintenance: Oldham couplings require periodic inspection and maintenance to ensure proper functioning. The center disc may wear out over time and need replacement, especially in applications with high torque or frequent start-stop cycles.

              Despite these limitations, Oldham couplings remain a popular choice in many applications due to their vibration reduction, backlash minimization, and moderate misalignment compensation capabilities. However, it is essential to carefully assess the specific requirements of the application and consider the potential drawbacks before selecting an Oldham coupling.

              oldham coupling

              How do Temperature and Environmental Conditions Affect the Performance of an Oldham Coupling?

              The performance of an Oldham coupling can be influenced by temperature and environmental conditions. The choice of materials used in the coupling’s construction plays a vital role in determining its suitability for specific operating environments. Here are some factors to consider:

              Temperature: Extreme temperatures can affect the material properties of the Oldham coupling components. High temperatures can lead to thermal expansion, which might cause changes in the coupling’s dimensions and interfere with its performance. In contrast, low temperatures can make materials more brittle, reducing the coupling’s ability to withstand torque and misalignment. It is essential to select materials that can operate effectively within the temperature range of the intended application.

              Corrosive Environments: In corrosive environments, such as chemical processing plants or marine applications, it is crucial to use materials that are resistant to corrosion. Stainless steel and other corrosion-resistant alloys are commonly used in such conditions to ensure the longevity and reliability of the Oldham coupling.

              Dust and Contaminants: Dust, dirt, and other contaminants can accumulate on the coupling’s moving parts, leading to increased wear and reduced performance. Regular cleaning and maintenance are essential in environments where dust and contaminants are prevalent.

              Humidity and Moisture: High humidity or moisture can lead to the formation of rust or corrosion on metal components. For applications in such environments, it is essential to use materials with proper corrosion resistance or consider protective coatings.

              Shock and Vibration: In applications where the coupling is subjected to high levels of shock and vibration, it is essential to ensure that the coupling’s design and materials can withstand these dynamic forces without premature failure.

              Proper selection of materials and regular maintenance can help mitigate the impact of temperature and environmental conditions on the performance of an Oldham coupling. Additionally, consulting with coupling manufacturers or engineering experts can provide valuable insights into choosing the most suitable coupling for specific operating conditions.

              oldham coupling

              Advantages of Using an Oldham Coupling Compared to Other Types of Couplings

              An Oldham coupling offers several advantages over other types of couplings, making it a preferred choice in certain applications:

              • Misalignment Compensation: The Oldham coupling can handle both angular and axial misalignments between shafts. It allows for up to a few degrees of misalignment while transmitting torque smoothly, reducing the risk of premature wear and failure caused by misalignment.
              • No Backlash: Unlike some other flexible couplings, the Oldham coupling has minimal backlash. This means there is little to no play or clearance between the coupling components during rotation, ensuring precise torque transmission and positioning in high-precision applications.
              • Vibration and Noise Damping: The sliding action of the middle block in the coupling helps to isolate the shafts from each other, reducing vibrations and noise during operation. This feature is beneficial in applications where vibration dampening is critical to equipment performance and longevity.
              • High Torque Transmission: Oldham couplings can handle relatively high torque transmission, making them suitable for applications with moderate to high torque requirements.
              • Low Maintenance: Due to its design, the Oldham coupling experiences minimal wear during operation, leading to lower maintenance requirements and longer service life.
              • Easy Installation: Oldham couplings are relatively easy to install and remove, simplifying maintenance and replacement procedures.
              • Electrically Insulating: Some Oldham couplings are available with non-conductive materials, providing electrical isolation between shafts, which is essential in certain applications.
              • Cost-Effective: Compared to other high-performance couplings, Oldham couplings are often more cost-effective, providing reliable performance without breaking the budget.

              Overall, the Oldham coupling is an excellent choice in applications where misalignment compensation, precision torque transmission, vibration dampening, and low maintenance are critical factors for successful operation. Its unique design and features make it suitable for various industrial and automation systems, contributing to smoother and more efficient mechanical power transmission.

              China Good quality Zs Factory Price High Precision Oldham Shaft Coupling for Automation Machinery  oldham couplingChina Good quality Zs Factory Price High Precision Oldham Shaft Coupling for Automation Machinery  oldham coupling
              editor by CX 2023-08-09

              China Standard Made in China Casting Iron 1“ 2 “ 3“ 4” Agricultural Machinery Parts Half Coupling brass coupling

              Product Description

              1
              Name: Made in china casting iron 1″ 2 ” 3″  4″ agricultural machinery parts half coupling
              Material: Casting Iron
              Min order: 1000 pcs
              Packing: export standard packing
              Customized production is available as your drawings or sample.
               

              Process Sand Casting
              Material Grey Iron , Ductile Iron, Carbon Steel 
              Weight 0.1Kgs~100Kgs
              Testing instrument  composition testing Spectrometer, Metallographic microscope
              Performance testing Hardness tester, Tensile testing machine
              Size Measuring  Vernier Caliper, Depth Caliper, feeler gauge,Thread Gauge , Height Gauge
              Roughness Ra1.6~Ra6.3
              Machining Equipment CNC Center , CNC Machines, Turning, Drilling, Milling, Boring machine,Grinding Machines,
              Wire EDM,Laser Cutting&Welding, Plasma Cutting &Welding, EDM etc.
              Quality control Sampling inspection of raw materials and semi-finished products, 100% Inspection of finished products  
              Surface Treatment Sand Blast , Painting,  Powder Coating, Galvanized ,  Hot Galvanized
              Production Capacity 60000T / Years
              Lead Time Normally 30 – 45 Days.
              Payment Terms T/T , L/C 
              Material Standard ASTM , AISI , DIN , BS, JIS, GB,
              Certification ISO9001:2008, IATF16949:2016

              2
              About  quality
              We insist that the survival of the company should depend on the products quality continuous improvement, without which we cannot survive for long.
              Our product quality control system
              Quality control involves the inspection and control of incoming materials, production process and finished products.
              1 Firstly, metallurgical microscope analysis is performed on randomly sampled incoming materials to ensure that the chemical composition meets the production requirements.
              2 Then, during the production process, there are QC personnel to conduct timely spot checks to ensure that the product is free of defects during the manufacturing process and to coordinate and handling of any abnormal quality issues that may arise.
              3 The final step in the production process is a magnetic particle detector for metal parts to detect hidden cracks or other defects.
              4 All the finished metal parts is sampled in proportion and sent to the laboratory for various mechanical property tests and dimensional measurements, and the surface quality is manually 100% inspected.
              5 About the quality management system, we strictly carry out system management in accordance with ISO9001 and TS16949 quality standards and 5S lean production management is implemented on the production site.

              3
              Our Advantages:
               Brand
              Our parent company, HiHangZhou Group, is a world-renowned high-end machinery manufacturing enterprise with 40 domestic subsidiaries and branches and 8 foreign manufacturing plants. Has long-term experience and good reputation in cooperation with world-renowned enterprises.
              Technology
              We have a complete production process and equipment research and development capabilities for ferrous metals forming. More than 25 years of production experience in forging equipment and casting equipment manufacturers, make us more thoroughly get  all the performance of each equipment. One-third of our company’s employees are technician and R&D personnel, ensuring that high-quality products are produced with high efficiency.
              Service
              We can provide custom and standard manufacturing services with multiple manufacturing process integrations. The quality and delivery of products can be fully guaranteed, and the ability to communicate quickly and effectively.
              Culture
              The unique corporate culture can give full play to the potential of individuals and  provide a strong vitality for the sustainable development of the company.
              Social responsibility
              Our company strictly implements low-carbon environmental protection, energy-saving and emission-reduction production, and is a benchmark enterprise in local region.

              5
              Company Culture 

              Our Vision
              To become 1 of the leading companies

              Our Mission
              To become a platform for employees to realize their dream
              To become 1 of the transforming and upgrading pacemaker of Chinese enterprises
              To set the national brands with pride

              Our Belief
              Strive to build the company into an ideal platform for entrepreneurs to realize their self-worth and contribute to the society

              Values
              Improvement is innovation, everyone can innovate
              innovation inspired and failures tolerated

              4
              FAQ
              1.
              Q:  Are you a trading company or a manufacturer?
              A:  Obviously we are a manufacturer of forging products, casting products and also have a high level of machining capabilities.

              2.
              Q:  What series products do your have?
              A:  We are mainly engaged in forming processing of ferrous metals, including processing by casting , forging and machining. As you know, such machinery parts can be observed in various industries of equipment manufacturing.

              3
              Q:  Do you provide samples? is it free?
              A:  Yes, we commonly provide samples according to the traditional practice, but we also need customers to provide a freight pay-by-account number to show mutual CZPT of cooperation.

              4
              Q:  What is your minimum order quantity?
              A:  Yes, we require all international orders to have an minimum order quantity. The quantity is up to the exact products feature or property such as the material, weight, construction etc.

              5
              Q:  What is the lead time?
              A:  Generally our forging products and casting products need to make new dies or molds, the time of making new dies or molds and samples within 30-45 days, and the large batch production time within 30-45 days. it’s also according to the parts structural complexity and quantity.

              6
              Q: What kinds of payment methods do you accept?
              A: You can make the payment by T/T or L/C. 30% deposit in advance, 70% balance against the copy of B/L.

              Certification

               
               

              Standard Or Nonstandard: Nonstandard
              Shaft Hole: 10-32
              Torque: 70-80N.M
              Bore Diameter: 19mm
              Speed: 4000r/M
              Structure: Rigid
              Samples:
              US$ 20/Piece
              1 Piece(Min.Order)

              |
              Request Sample

              Customization:
              Available

              |

              Customized Request

              What Is a Coupling?

              A coupling is a mechanical device that links two shafts together and transmits power. Its purpose is to join rotating equipment while permitting a small amount of misalignment or end movement. Couplings come in a variety of different types and are used in a variety of applications. They can be used in hydraulics, pneumatics, and many other industries.
              gearbox

              Types

              Coupling is a term used to describe a relationship between different modules. When a module depends on another, it can have different types of coupling. Common coupling occurs when modules share certain overall constraints. When this type of coupling occurs, any changes to the common constraint will also affect the other modules. Common coupling has its advantages and disadvantages. It is difficult to maintain and provides less control over the modules than other types of coupling.
              There are many types of coupling, including meshing tooth couplings, pin and bush couplings, and spline couplings. It is important to choose the right coupling type for your specific application to get maximum uptime and long-term reliability. Listed below are the differences between these coupling types.
              Rigid couplings have no flexibility, and require good alignment of the shafts and support bearings. They are often used in applications where high torque is required, such as in push-pull machines. These couplings are also useful in applications where the shafts are firmly attached to one another.
              Another type of coupling is the split muff coupling. This type is made of cast iron and has two threaded holes. The coupling halves are attached with bolts or studs.
              gearbox

              Applications

              The coupling function is an incredibly versatile mathematical tool that can be used in many different scientific domains. These applications range from physics and mathematics to biology, chemistry, cardio-respiratory physiology, climate science, and electrical engineering. The coupling function can also help to predict the transition from one state to another, as well as describing the functional contributions of subsystems in the system. In some cases, it can even be used to reveal the mechanisms that underlie the functionality of interactions.
              The coupling selection process begins with considering the intended use of the coupling. The application parameters must be determined, as well as the operating conditions. For example, if the coupling is required to be used for power transmission, the design engineer should consider how easily the coupling can be installed and serviced. This step is vital because improper installation can result in a more severe misalignment than is specified. Additionally, the coupling must be inspected regularly to ensure that the design parameters remain consistent and that no detrimental factors develop.
              Choosing the right coupling for your application is an important process, but it need not be difficult. To find the right coupling, you must consider the type of machine and environment, as well as the torque, rpm, and inertia of the system. By answering these questions, you will be able to select the best coupling for your specific application.
              gearbox

              Problems

              A coupling is a device that connects two rotating shafts to transfer torque and rotary motion. To achieve optimal performance, a coupling must be designed for the application requirements it serves. These requirements include service, environmental, and use parameters. Otherwise, it can prematurely fail, causing inconvenience and financial loss.
              In order to prevent premature failure, couplings should be properly installed and maintained. A good practice is to refer to the specifications provided by the manufacturer. Moreover, it is important to perform periodic tests to evaluate the effectiveness of the coupling. The testing of couplings should be performed by qualified personnel.
              China Standard Made in China Casting Iron 1“ 2 “ 3“ 4” Agricultural Machinery Parts Half Coupling   brass couplingChina Standard Made in China Casting Iron 1“ 2 “ 3“ 4” Agricultural Machinery Parts Half Coupling   brass coupling
              editor by CX