China manufacturer Zs Factory Price High Precision Oldham Type Flexible Couplings for Automation Machinery oldham coupling

Product Description

Introduction 

  • Oldham couplings are a 3 piece design comprised of 2 aluminum hubs press fit CHINAMFG a center disk. Torque transmission is accomplished by mating the slots on the center disk to the drive tenons on the hubs. During operation the center disk slides on the tenons of each hub (which are orientated 90 apart) to transmit torque.
  • While the couplings accommodate a small amount of angular and axial misalignment, they are especially useful in applications with parallel misalignment.
  • We offers oldham couplings in set screw or clamp styles with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp style, keyed, or keyless) are interchangeable and can be combined into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for improved lubricity, increased life, and low inertia. Hubs are also available in stainless steel CHINAMFG request for increased corrosion resistance.

Application

  • Ideal for many light duty industrial and motion control applications, oldham couplings have the ability to protect more expensive machinery components.
  • For example the oldham coupling acts as a torque limiter during overload. When the disk fails, it breaks cleanly and does not allow any transmission of power.
  • Oldham couplings also have the advantage of electrical isolation due to the non-conductive nature of the center disk.
  • This prevents electrical currents from being passed to delicate instruments which can cause inaccurate data readings or damage.

Feature

  • High absorption capacity of radial misaligment
  • They do not produce kinematic errors in transmission
  • Elimination of loads on shaft
  • Mechanical protection against excessive torque
  • Replaceable disc

1. We have first-class testing equipment to detect linear guide various data parameters and control the quality of the linear guide.Whenever linear guides must first detected whether the quality is qualified and the unqualified linear guide will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.

2. We have our own R & D capabilities, to help customers solve the problem of non-standard linear guides.We can also according to customer requirements change their own mark.

3. Price, our manufacture ensure that our prices across China are quite competitive.It is better for you to compare prices and quality among suppliers.But everyone knows you can not buy the highest quality products with the lowest price,but our product is the best quailty if you use equal price.

FAQ:

1. When can I get the quotation ?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

2. How can I get a sample to check your quality ? 
After price confirmed,sample order is available to check our quality.

3. What is your main products ? 
Linear motion systems,like lead screws, flexible coupling,Miniature linear guide rails,ball screws,linear rod shaft,ceramic bearings …etc. But also CNC machining centers and CNC machinable tooling boards.

4. Could you get a better price on your products ?
Yes,you can.We will give the best price on all of the products you need,which can help you to compete other companies in your markets.

5. What is the strength of your company ?
We have a engineer team,who have well experienced on product’s and machine designs.We can help you to solve the problems you meet. 

Welcome to inquiry US! 

    /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    oldham coupling

    Specific Safety Considerations for Using Oldham Couplings in High-Speed Applications

    When using Oldham couplings in high-speed applications, there are several safety considerations to keep in mind to ensure the safe and efficient operation of the machinery:

    1. Material Selection: Choose high-quality materials for the Oldham coupling components to withstand the stresses and forces experienced at high speeds.

    2. Proper Installation: Ensure the coupling is installed correctly and securely to prevent any chances of coupling failure or disengagement during high-speed operation.

    3. Balancing: Balance the coupling components accurately to minimize vibration and prevent excessive wear, which can be more pronounced at high speeds.

    4. Regular Inspections: Implement a regular inspection and maintenance schedule to identify any signs of wear, misalignment, or damage that may occur due to high-speed operation.

    5. Lubrication: Use appropriate lubrication to reduce friction and heat generation, which is crucial in high-speed applications.

    6. Temperature Consideration: Monitor the temperature of the coupling during operation as high speeds can result in increased heat generation.

    7. Avoid Overloading: Do not exceed the recommended torque and speed limits specified by the manufacturer to avoid overloading the coupling.

    8. Coupling Guards: Consider using coupling guards or covers to protect personnel from rotating or moving coupling components in high-speed systems.

    9. Emergency Shutdown: Install an emergency shutdown system to quickly stop the machinery in case of coupling failure or other emergencies.

    10. Compliance with Standards: Ensure that the Oldham coupling and its installation comply with industry standards and regulations for high-speed applications.

    By adhering to these safety considerations and implementing preventive measures, the risk of accidents, machinery damage, and downtime in high-speed applications can be significantly reduced. Always consult the coupling manufacturer’s guidelines and follow best practices for safe operation and maintenance.

    oldham coupling

    Can an Oldham Coupling be Used in Precision Motion Control Applications?

    Yes, an Oldham coupling can be used in precision motion control applications. Oldham couplings are known for their ability to provide constant velocity transmission while accommodating misalignment. These couplings offer low backlash and minimal hysteresis, making them suitable for precision motion control systems.

    Precision motion control applications require accurate and repeatable motion, which can be achieved by using an Oldham coupling. The coupling’s design allows it to handle angular misalignment without introducing significant axial or radial forces. This feature helps maintain the accuracy and integrity of the motion control system.

    Oldham couplings are often used in applications such as robotics, CNC machines, optical equipment, and other systems where precise positioning and smooth motion are essential. Their ability to reduce vibration and minimize backlash is particularly beneficial in these applications, as it enhances the system’s overall performance and accuracy.

    When selecting an Oldham coupling for precision motion control, it is essential to consider factors such as the required torque capacity, speed, and shaft sizes. Additionally, regular maintenance and proper alignment are crucial to ensure the coupling’s optimal performance in precision applications.

    oldham coupling

    What is an Oldham Coupling and How Does It Function in Mechanical Systems?

    An Oldham coupling is a type of flexible coupling used in mechanical systems to transmit torque between two shafts that are misaligned. It consists of three main components: two hubs or discs and a middle block. The two hubs are connected to the respective shafts, and the middle block sits in between them.

    The key feature of the Oldham coupling is the middle block, which has slots on its opposite faces and is connected to the hubs using pins or keys. The slots in the middle block are oriented perpendicular to each other, allowing the middle block to move in a plane perpendicular to the axis of the shafts.

    When torque is applied to one shaft, it is transmitted to the middle block of the coupling. Due to the slots, the middle block can slide laterally as the shafts rotate, accommodating both angular and axial misalignments between the shafts. This sliding action helps to reduce the reaction forces and wear that would otherwise occur in rigid couplings when misalignment is present.

    Oldham couplings are known for their ability to provide constant velocity transmission even when misalignment exists. They do not have any backlash, which means there is minimal play between the coupling components during rotation. This feature makes them suitable for precision applications where accurate torque transmission and positioning are required.

    One of the main advantages of the Oldham coupling is that it effectively isolates the connected shafts from each other, which can help in reducing vibrations and noise. Additionally, it can compensate for parallel misalignment between the shafts, making it ideal for applications where parallel shafts need to be connected while allowing some degree of misalignment.

    Oldham couplings are commonly used in various industrial machinery and automation systems, including CNC machines, robotics, printing presses, and conveyor systems. They are particularly useful in applications where precise torque transmission, misalignment compensation, and low maintenance are essential.

    China manufacturer Zs Factory Price High Precision Oldham Type Flexible Couplings for Automation Machinery  oldham couplingChina manufacturer Zs Factory Price High Precision Oldham Type Flexible Couplings for Automation Machinery  oldham coupling
    editor by CX 2024-01-09