by ep | Jun 24, 2026 | Blog
If you have ever examined a 3D print under raking light and noticed a regular banding pattern on the vertical walls — bands spaced exactly one leadscrew pitch apart — you have seen the direct result of leadscrew misalignment transmitting radial wobble into the Z-axis...
by ep | Jun 24, 2026 | Blog
The centre disc is the only wearing component in an Oldham coupling, and the material it is made from governs almost every practical performance characteristic of the assembly — how long it lasts, how much torque it can carry, how hot it can run, what chemicals it can...
by ep | Jun 24, 2026 | Blog
The centre disc is the only wearing component in an Oldham coupling. When everything else about the coupling is correctly specified and installed, the disc is what limits service life — and replacing it at the right time is what prevents a gradual performance...
by ep | Jun 24, 2026 | Blog
Medical devices impose a set of requirements on their mechanical components that goes well beyond what most industrial applications demand. Precision must be absolute — a diagnostic instrument that produces variable results depending on how its drive mechanism is...
by ep | Jun 24, 2026 | Blog
Stepper motors are the workhorse of low-to-medium cost motion control. From desktop 3D printers and CNC routers to laboratory dispensers and industrial indexing equipment, the stepper motor’s ability to move in precise angular increments without a position...