China Oilfield Casing Accessory 3/4″ 7/8″ 1″ Sucker Rod Coupling Manufacture Puyang Zhongshi coupling electrical

Product Description

Trim Hole SM 7/8″ Sucker Rod Coupling Manufacture From HangZhou Zhongshi

Item Description
Class T and Course SM coupling for sucker rods are produced as for each API Specification 11B. 
Class T coupling use AISI 5140 to manufacture.
Course SM coupling is applied on the foundation metal.
The coupling is coated employing phosphate chemical remedy or blackoxide on customer’s request.
The couplings are obtainable in entire size, slender gap and above dimension.
Mix couplings are obtainable for various diameters for both Course T and Class SM couplings.
 
Parameters of sucker rod coupling

Type Quality O.D (mm) Minimum Lengh (mm) Hardness Bodyweight (kg) Normal
three/4″ 19-T forty one.05~41.forty three one hundred and one.6~103.seventeen 56-62HRA .65 API 11B
7/8″ 22-T forty five.75~forty six.thirteen forty five.seventy five~46.thirteen 56-62HRA .eight API 11B
one” 25-T fifty five.3.5~fifty five.seventy three 55.35~fifty five.73 twelve-23HRA one.15 API 11B

We could also supply tubing coupling. 

Descriptions and measurement Type of Therad O.D*L
(mm)
Fat
(kg)
Tubing Coupling
 
one.050 NUE 33.35*eighty.96 .23
1.050 EUE forty two.sixteen*eighty two.fifty five .38
one.315 NUE 42.sixteen*82.fifty five .38
1.315 EUE 48.26*88.90 .fifty seven
1.660 NUE fifty two.17*88.90 .fifty nine
1.660 EUE 58.88*ninety five.25 .sixty eight
one.900 NUE 55.88*95.twenty five .fifty six
one.900 EUE 63.fifty*98.forty two .84
2-3/8″ NUE 73.02*107.ninety five one.28
two-3/8″ EUE 77.80*132.82 one.fifty five
two-7/8″ NUE 88.90*one hundred thirty.eighteen 2.34
two-7/8″ EUE 93.17*133.35 2.forty
3-1/2″ NUE 107.ninety five*142.88 3.71
three-1/2″ EUE 114.30*146.05 four.ten
four” NUE a hundred and twenty.sixty five*146.05 four.35
four” EUE 127.00*152.forty 4.eighty two
4-1/2″ NUE 132.08*one hundred fifty five.58 four.89
four-1/2″ EUE 141.30*158.seventy five six.05

US $1-20
/ Piece
|
1 Piece

(Min. Order)

###

Manufacturing Process: Forging
Surface Treatment: Without Processing
Operation Pressure: Vacuum
Material: Cast Steel
Sucker Rod Coupling Type: Class T and Class Sm Coupling
Apply Hole Type: Full Hole, and Silm Hole

###

Customization:

###

Type Grade O.D (mm) Minimum Lengh (mm) Hardness Weight (kg) Standard
3/4" 19-T 41.05~41.43 101.6~103.17 56-62HRA 0.65 API 11B
7/8" 22-T 45.75~46.13 45.75~46.13 56-62HRA 0.8 API 11B
1" 25-T 55.3.5~55.73 55.35~55.73 12-23HRA 1.15 API 11B

###

Descriptions and size Type of Therad O.D*L
(mm)
Weight
(kg)
Tubing Coupling
 
1.050 NUE 33.35*80.96 0.23
1.050 EUE 42.16*82.55 0.38
1.315 NUE 42.16*82.55 0.38
1.315 EUE 48.26*88.90 0.57
1.660 NUE 52.17*88.90 0.59
1.660 EUE 58.88*95.25 0.68
1.900 NUE 55.88*95.25 0.56
1.900 EUE 63.50*98.42 0.84
2-3/8" NUE 73.02*107.95 1.28
2-3/8" EUE 77.80*132.82 1.55
2-7/8" NUE 88.90*130.18 2.34
2-7/8" EUE 93.17*133.35 2.40
3-1/2" NUE 107.95*142.88 3.71
3-1/2" EUE 114.30*146.05 4.10
4" NUE 120.65*146.05 4.35
4" EUE 127.00*152.40 4.82
4-1/2" NUE 132.08*155.58 4.89
4-1/2" EUE 141.30*158.75 6.05
US $1-20
/ Piece
|
1 Piece

(Min. Order)

###

Manufacturing Process: Forging
Surface Treatment: Without Processing
Operation Pressure: Vacuum
Material: Cast Steel
Sucker Rod Coupling Type: Class T and Class Sm Coupling
Apply Hole Type: Full Hole, and Silm Hole

###

Customization:

###

Type Grade O.D (mm) Minimum Lengh (mm) Hardness Weight (kg) Standard
3/4" 19-T 41.05~41.43 101.6~103.17 56-62HRA 0.65 API 11B
7/8" 22-T 45.75~46.13 45.75~46.13 56-62HRA 0.8 API 11B
1" 25-T 55.3.5~55.73 55.35~55.73 12-23HRA 1.15 API 11B

###

Descriptions and size Type of Therad O.D*L
(mm)
Weight
(kg)
Tubing Coupling
 
1.050 NUE 33.35*80.96 0.23
1.050 EUE 42.16*82.55 0.38
1.315 NUE 42.16*82.55 0.38
1.315 EUE 48.26*88.90 0.57
1.660 NUE 52.17*88.90 0.59
1.660 EUE 58.88*95.25 0.68
1.900 NUE 55.88*95.25 0.56
1.900 EUE 63.50*98.42 0.84
2-3/8" NUE 73.02*107.95 1.28
2-3/8" EUE 77.80*132.82 1.55
2-7/8" NUE 88.90*130.18 2.34
2-7/8" EUE 93.17*133.35 2.40
3-1/2" NUE 107.95*142.88 3.71
3-1/2" EUE 114.30*146.05 4.10
4" NUE 120.65*146.05 4.35
4" EUE 127.00*152.40 4.82
4-1/2" NUE 132.08*155.58 4.89
4-1/2" EUE 141.30*158.75 6.05

Types of Couplings

A coupling is a device that connects two shafts and transmits power from one to the other. Its main purpose is to join two pieces of rotating equipment. It also allows for some degree of misalignment or end movement. Here are a few examples of coupling types: Beam coupling, Flexible coupling, Magnetic coupling, and Shaft coupling.
gearbox

Beam coupling

Beam couplings are used to couple motors and other devices. They are available in several types, including flexible, slit, and rigid beam couplings. Each has unique properties and characteristics. These couplings are best for applications requiring a high level of precision and long life. They are also a practical solution for the connection of stepping and servo motors with screw rods.
Beam couplings are usually made of stainless steel or aluminum alloy, and feature spiral and parallel cut designs. Multiple cuts allow the coupling to accommodate multiple beams and improve angular and parallel misalignment tolerances. Additionally, beam couplings are comparatively cheaper than other types of rotary joints, and they require minimal maintenance.
The materials of a beam coupling should be considered early in the specification process. They are typically made of aluminum or stainless steel, but they can also be manufactured from Delrin, titanium, and other engineering grade materials. Beam couplings are often available in multiple sizes to fit specific shaft diameters.
Beam couplings are a key component of motion control systems. They provide excellent characteristics when used properly, and they are a popular choice for many applications. A thorough understanding of each type of coupling will help to prevent coupling failure and enhance system performance. Therefore, it is important to choose the right coupling for your application.
Various types of beam couplings have unique advantages and disadvantages. The FCR/FSR design has two sets of three beams. It is available in both metric and inch shaft sizes. The FCR/FSR couplings are ideal for light-duty power transmission applications. A metric shaft is more suitable for these applications, while an inch shaft is preferred for heavier duty applications.
Two types of beam couplings are available from Ruland. The Ruland Flexible beam coupling has a multi-helical cut design that offers a greater flexibility than commodity beam couplings. This design allows for higher torque capabilities while minimizing wind-up. In addition, it is also more durable than its commodity counterparts.

Flexible coupling

A flexible coupling is a versatile mechanical connection that allows for the easy coupling of two moving parts. The design of these couplings allows for a variety of stiffness levels and can address a variety of problems, such as torsional vibrations or critical speed. However, there are a number of tradeoffs associated with flexible couplings.
One of the biggest issues is the installation of the coupling, which requires stretching. This problem can be exacerbated by cold temperatures. In such a case, it is vital to install the coupling properly. Using a gear clamp is one of the most important steps in a successful installation. A gear clamp will keep the coupling in place and prevent it from leaking.
Another common type of flexible coupling is the gear coupling. These couplings are composed of two hubs with crowned external gear teeth that mesh with two internally splined flanged sleeves. The massive size of the teeth makes them resemble gears. Gear couplings offer good torque characteristics but require periodic lubrication. These couplings can also be expensive and have a limited number of applications.
Another type of flexible coupling is the SDP/SI helical coupling. These couplings can accommodate axial motion, angular misalignment, and parallel offset. This design incorporates a spiral pattern that makes them flexible. These couplings are available in stainless steel and aluminum.
A flexible coupling has a wide range of applications. Generally, it is used to connect two rotating pieces of equipment. Depending on its design, it can be used to join two pieces of machinery that move in different directions. This type of coupling is a type of elastomeric coupling, which has elastic properties.
There are many types of flexible couplings available for different types of applications. The purpose of a flexible coupling is to transmit rotational power from one shaft to another. It is also useful for transmitting torque. However, it is important to note that not all flexible couplings are created equally. Make sure to use a reputable brand for your coupling needs. It will ensure a reliable connection.
The simplest and most commonly used type of flexible coupling is the grid coupling. This type of coupling uses two hubs with slotted surfaces. The steel grid is allowed to slide along these slots, which gives it the ability to flex. The only limitation of this type of coupling is that it can only tolerate a 1/3 degree misalignment. It can transmit torques up to 3,656 Nm.
gearbox

Magnetic coupling

Magnetic coupling is a technique used to transfer torque from one shaft to another using a magnetic field. It is the most common type of coupling used in machinery. It is highly effective when transferring torque from a rotating motor to a rotating shaft. Magnetic couplings can handle high torques and high speeds.
Magnetic coupling is described by the energy difference between a high-spin state and a broken symmetry state, with the former being the energy of a true singlet state. In single-determinant theories, this energy difference is called the Kij. Usually, the broken-symmetry state is a state with two interacting local high-spin centers.
The magnetic coupling device is regarded as a qualitative leap in the reaction still industry. It has solved a number of problems that had plagued the industry, including flammability, explosiveness, and leakage. Magnetic couplings are a great solution for many applications. The chemical and pharmaceutical industries use them for various processes, including reaction stills.
Magnetic couplings are a good choice for harsh environments and for tight spaces. Their enclosed design keeps them fluid and dust-proof. They are also corrosion-resistant. In addition, magnetic couplings are more affordable than mechanical couplings, especially in areas where access is restricted. They are also popular for testing and temporary installations.
Another use for magnetic coupling is in touch screens. While touch screens use capacitive and resistive elements, magnetic coupling has found a cool new application in wireless charging. While the finger tracking on touch screens may seem like a boley job, the process is very sensitive. The devices that use wireless charging need to have very large coils that are locked into resonant magnetic coupling.
Magnetic couplings also help reduce hydraulic horsepower. They cushion starts and reduce alignment problems. They can also improve flow in oversized pumps. A magnetic coupling with an 8 percent air gap can reduce hydraulic HP by approximately 27 percent. In addition, they can be used in aggressive environments. They also help reduce repair costs.
Magnetic couplings are a great choice for pumps and propeller systems because they have the added advantage of being watertight and preventing shaft failure. These systems also have the benefit of not requiring rotating seals.
gearbox

Shaft coupling

A shaft coupling joins two shafts and transmits rotational motion. Generally, shaft couplings allow for some degree of misalignment, but there are also torque limiters. Selecting the right coupling can save you time and money and prevent equipment downtime. Here are the main features to consider when purchasing a coupling for your application.
Shaft couplings should be easy to install and disassemble, transmit full power to the mated shaft, and reduce shock loads. A shaft coupling that does not have projecting parts should be used for machines that move or rotate at high speeds. Some types of shaft couplings are flexible while others are rigid.
Shaft couplings can be used in a variety of applications, including piping systems. They can be used to connect shafts that are misaligned and help maintain alignment. They can also be used for vibration dampening. Shaft couplings also allow shafts to be disconnected when necessary.
Shaft couplings can accommodate a certain amount of backlash, but this backlash must be well within the tolerance set by the system. Extremely high backlash can break the coupling and cause excessive wear and stress. In addition, excessive backlash can lead to erratic alignment readings. To avoid these issues, operators must reduce backlash to less than 2deg.
Shaft couplings are often referred to by different names. Some are referred to as “sliced” couplings while others are known as “slit” couplings. Both types offer high torque and torsional stiffness. These couplings are typically made from metals with various alloys, such as acetal, stainless steel, or titanium.
CZPT Pulley produces shaft couplings for a variety of applications. These products are used in high-power transmission systems. They have several advantages over friction couplings. In addition to minimizing wear, they don’t require lubrication. They are also capable of transmitting high torque and high speeds.
Another type of shaft coupling is the universal coupling. It is used to transmit power to multiple machines with different spindles. Its keyed receiving side and flanges allow it to transmit power from one machine to another.
China Oilfield Casing Accessory 3/4China Oilfield Casing Accessory 3/4
editor by czh 2023-01-14