Опис продукту
Shaft Coupling with Cross-Shaped Slider (SL)
Опис продукту
SL cross-type Oldham coupling also known as metal slider coupling, 2 end surface is provided with middle slider radial grooves and half couplings are respectively supplied with tenon which was perpendicular to the middle slider at both ends of the tenon are respectively inserted, then coupling groove 2.5, forming a moving pair, if the amount of axial misalignment or deflection, motion of the slider in the groove of the slide, so to add lubricating oil working face groove and the slider, if the 2 are not concentric, when the speed is high, due to the eccentric slider will produce large centrifugal force and wear, and to bring the shaft and the loading of Jose this only applies to low speed and large load transfer.
Параметри продукту
| Модель | Tn(N·M) | [n]r/min | d | Д | D1 | Л | H | S | (kg.m 2 ) | (kg) |
| SL70 | 120 | 250 | 15~18 | 70 | 32 | 42 | 14 | 0.5 | 0.002 | 1.5 |
| SL90 | 250 | 250 | 20~30 | 90 | 45 | 52 | 14 | 0.008 | 2.6 | |
| SL100 | 500 | 250 | 36~40 | 100 | 60 | 70 | 19 | 0.026 | 5.5 | |
| SL130 | 800 | 250 | 45~50 | 130 | 80 | 90 | 19 | 0.07 | 10 | |
| SL150 | 1250 | 250 | 55~60 | 150 | 95 | 112 | 19 | 0.14 | 15.5 | |
| SL170 | 2000 | 250 | 65~70 | 170 | 105 | 125 | 24 | 0.25 | 22.4 | |
| SL190 | 3200 | 250 | 75~80 | 190 | 110 | 140 | 29 | 0.5 | 31.5 | |
| SL210 | 5000 | 250 | 85~90 | 210 | 130 | 160 | 33 | 1.0 | 0.9 | 45 |
| SL240 | 8000 | 250 | 95~100 | 240 | 140 | 180 | 33 | 1.6 | 59.5 | |
| SL260 | 9000 | 250 | 100~110 | 260 | 160 | 190 | 33 | 2 | 76 | |
| SL280 | 10000 | 100 | 110~120 | 280 | 170 | 200 | 33 | 3 | 94.3 | |
| SL300 | 13000 | 100 | 120~130 | 300 | 180 | 210 | 43 | 4.3 | 111 | |
| SL320 | 16000 | 100 | 130~140 | 320 | 190 | 220 | 43 | 5.7 | 129 | |
| SL340 | 20000 | 100 | 150 | 340 | 210 | 250 | 48 | 8.4 | 162 | |
| SL360 | 32500 | 100 | 160 | 360 | 240 | 280 | 48 | 19.2 | 258 | |
| SL400 | 38700 | 80 | 170 | 400 | 260 | 300 | 48 | 26.1 | 305 | |
| SL460 | 63000 | 70 | 200 | 460 | 300 | 350 | 58 | 62.9 | 560 |
Detailed Photos
Company Profile
HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
After Sales Service
1. Design Services
Our design team has experience in the Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.
5. Quality Control
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.
Найчастіші запитання
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artwork in PDF or AI format.
Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order the cost of the sample will be deducted.
Q 5: How extended is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 9: What’s your payment?
A:1) T/T
♦Зв'яжіться з нами
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
Чи може муфта Oldham зменшити вібрацію та люфт у механічних системах?
Так, муфта Oldham може допомогти зменшити вібрацію та мінімізувати люфт у механічних системах, що робить її популярним вибором для застосувань, які потребують точної та плавної передачі потужності.
Зменшення вібрацій: Муфти Oldham мають трисекційну конструкцію, що складається з двох маточин та центрального диска. Центральний диск, також відомий як проставка, виготовлений з гнучкого матеріалу, такого як ацеталь або нейлон. Коли крутний момент передається через муфту, центральний диск згинається, поглинаючи будь-які перекоси між валами. Ця дія згинання допомагає поглинати вібрацію та зменшувати резонанс у системі, що призводить до плавнішої роботи та меншого механічного навантаження на з'єднані компоненти.
Мінімізація люфту: Люфт – це величина люфту або вільного руху між сполученими частинами механічної системи. У традиційних муфтах, таких як зубчасті муфти, може бути значний люфт через особливості зубців шестерень. Однак муфти Oldham мають унікальну конструкцію, яка дозволяє їм передавати крутний момент з мінімальним люфтом. Центральний диск забезпечує невеликий зазор між маточинами, що забезпечує плавне обертання без люфту. Ця характеристика особливо корисна в застосуваннях, що потребують точного керування рухом, таких як робототехніка та верстати з ЧПК.
Загалом, гнучка та безлюфтова природа муфт Oldham робить їх добре придатними для застосувань, де зменшення вібрації та точне керування рухом є важливими. Зменшуючи вібрацію та люфт, муфти Oldham сприяють загальній ефективності, точності та надійності механічної системи, в якій вони використовуються.
Чи можна використовувати муфту Oldham у системах точного керування рухом?
Так, муфту Oldham можна використовувати в системах точного керування рухом. Муфти Oldham відомі своєю здатністю забезпечувати передачу постійної швидкості, одночасно компенсуючи перекіс. Ці муфти мають низький люфт і мінімальний гістерезис, що робить їх придатними для систем точного керування рухом.
Для прецизійного керування рухом потрібні точні та повторювані рухи, чого можна досягти за допомогою муфти Oldham. Конструкція муфти дозволяє їй обробляти кутові зміщення без створення значних осьових або радіальних сил. Ця функція допомагає підтримувати точність і цілісність системи керування рухом.
Муфти Oldham часто використовуються в таких сферах застосування, як робототехніка, верстати з ЧПК, оптичне обладнання та інші системи, де важливі точне позиціонування та плавний рух. Їхня здатність зменшувати вібрацію та мінімізувати люфт є особливо корисною в цих сферах застосування, оскільки це підвищує загальну продуктивність та точність системи.
Вибираючи муфту Oldham для точного керування рухом, важливо враховувати такі фактори, як необхідний крутний момент, швидкість та розміри вала. Крім того, регулярне технічне обслуговування та правильне вирівнювання мають вирішальне значення для забезпечення оптимальної роботи муфти в точних застосуваннях.
What is an Oldham Coupling and How Does It Function in Mechanical Systems?
An Oldham coupling is a type of flexible coupling used in mechanical systems to transmit torque between two shafts that are misaligned. It consists of three main components: two hubs or discs and a middle block. The two hubs are connected to the respective shafts, and the middle block sits in between them.
The key feature of the Oldham coupling is the middle block, which has slots on its opposite faces and is connected to the hubs using pins or keys. The slots in the middle block are oriented perpendicular to each other, allowing the middle block to move in a plane perpendicular to the axis of the shafts.
When torque is applied to one shaft, it is transmitted to the middle block of the coupling. Due to the slots, the middle block can slide laterally as the shafts rotate, accommodating both angular and axial misalignments between the shafts. This sliding action helps to reduce the reaction forces and wear that would otherwise occur in rigid couplings when misalignment is present.
Oldham couplings are known for their ability to provide constant velocity transmission even when misalignment exists. They do not have any backlash, which means there is minimal play between the coupling components during rotation. This feature makes them suitable for precision applications where accurate torque transmission and positioning are required.
One of the main advantages of the Oldham coupling is that it effectively isolates the connected shafts from each other, which can help in reducing vibrations and noise. Additionally, it can compensate for parallel misalignment between the shafts, making it ideal for applications where parallel shafts need to be connected while allowing some degree of misalignment.
Oldham couplings are commonly used in various industrial machinery and automation systems, including CNC machines, robotics, printing presses, and conveyor systems. They are particularly useful in applications where precise torque transmission, misalignment compensation, and low maintenance are essential.
editor by CX 2023-08-22