Опис продукту
Shaft Coupling with Cross-Shaped Slider (SL)
Опис продукту
SL cross-type Oldham coupling also known as metal slider coupling, 2 end surface is provided with middle slider radial grooves and half couplings are respectively supplied with tenon which was perpendicular to the middle slider at both ends of the tenon are respectively inserted, then coupling groove 2.5, forming a moving pair, if the amount of axial misalignment or deflection, motion of the slider in the groove of the slide, so to add lubricating oil working face groove and the slider, if the 2 are not concentric, when the speed is high, due to the eccentric slider will produce large centrifugal force and wear, and to bring the shaft and the loading of Jose this only applies to low speed and large load transfer.
Параметри продукту
| Модель | Tn(N·M) | [n]r/min | d | Д | D1 | Л | H | S | (kg.m 2 ) | (kg) |
| SL70 | 120 | 250 | 15~18 | 70 | 32 | 42 | 14 | 0.5 | 0.002 | 1.5 |
| SL90 | 250 | 250 | 20~30 | 90 | 45 | 52 | 14 | 0.008 | 2.6 | |
| SL100 | 500 | 250 | 36~40 | 100 | 60 | 70 | 19 | 0.026 | 5.5 | |
| SL130 | 800 | 250 | 45~50 | 130 | 80 | 90 | 19 | 0.07 | 10 | |
| SL150 | 1250 | 250 | 55~60 | 150 | 95 | 112 | 19 | 0.14 | 15.5 | |
| SL170 | 2000 | 250 | 65~70 | 170 | 105 | 125 | 24 | 0.25 | 22.4 | |
| SL190 | 3200 | 250 | 75~80 | 190 | 110 | 140 | 29 | 0.5 | 31.5 | |
| SL210 | 5000 | 250 | 85~90 | 210 | 130 | 160 | 33 | 1.0 | 0.9 | 45 |
| SL240 | 8000 | 250 | 95~100 | 240 | 140 | 180 | 33 | 1.6 | 59.5 | |
| SL260 | 9000 | 250 | 100~110 | 260 | 160 | 190 | 33 | 2 | 76 | |
| SL280 | 10000 | 100 | 110~120 | 280 | 170 | 200 | 33 | 3 | 94.3 | |
| SL300 | 13000 | 100 | 120~130 | 300 | 180 | 210 | 43 | 4.3 | 111 | |
| SL320 | 16000 | 100 | 130~140 | 320 | 190 | 220 | 43 | 5.7 | 129 | |
| SL340 | 20000 | 100 | 150 | 340 | 210 | 250 | 48 | 8.4 | 162 | |
| SL360 | 32500 | 100 | 160 | 360 | 240 | 280 | 48 | 19.2 | 258 | |
| SL400 | 38700 | 80 | 170 | 400 | 260 | 300 | 48 | 26.1 | 305 | |
| SL460 | 63000 | 70 | 200 | 460 | 300 | 350 | 58 | 62.9 | 560 |
Detailed Photos
Company Profile
HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
After Sales Service
1. Design Services
Our design team has experience in the Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.
5. Quality Control
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.
Найчастіші запитання
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artwork in PDF or AI format.
Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order then the cost of the sample will be deducted.
Q 5: How extended is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 9: What’s your payment?
A:1) T/T
♦Зв'яжіться з нами
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
Чи може муфта Oldham зменшити вібрацію та люфт у механічних системах?
Так, муфта Oldham може допомогти зменшити вібрацію та мінімізувати люфт у механічних системах, що робить її популярним вибором для застосувань, які потребують точної та плавної передачі потужності.
Зменшення вібрацій: Муфти Oldham мають трисекційну конструкцію, що складається з двох маточин та центрального диска. Центральний диск, також відомий як проставка, виготовлений з гнучкого матеріалу, такого як ацеталь або нейлон. Коли крутний момент передається через муфту, центральний диск згинається, поглинаючи будь-які перекоси між валами. Ця дія згинання допомагає поглинати вібрацію та зменшувати резонанс у системі, що призводить до плавнішої роботи та меншого механічного навантаження на з'єднані компоненти.
Мінімізація люфту: Люфт – це величина люфту або вільного руху між сполученими частинами механічної системи. У традиційних муфтах, таких як зубчасті муфти, може бути значний люфт через особливості зубців шестерень. Однак муфти Oldham мають унікальну конструкцію, яка дозволяє їм передавати крутний момент з мінімальним люфтом. Центральний диск забезпечує невеликий зазор між маточинами, що забезпечує плавне обертання без люфту. Ця характеристика особливо корисна в застосуваннях, що потребують точного керування рухом, таких як робототехніка та верстати з ЧПК.
Загалом, гнучка та безлюфтова природа муфт Oldham робить їх добре придатними для застосувань, де зменшення вібрації та точне керування рухом є важливими. Зменшуючи вібрацію та люфт, муфти Oldham сприяють загальній ефективності, точності та надійності механічної системи, в якій вони використовуються.
Can an Oldham Coupling be Used in Both Horizontal and Vertical Shaft Orientations?
Yes, an Oldham coupling can be used in both horizontal and vertical shaft orientations. The design of the Oldham coupling allows it to accommodate misalignment between shafts in multiple directions, including axial, angular, and parallel misalignments.
In horizontal shaft arrangements, the Oldham coupling can handle misalignment between two parallel shafts while transmitting torque smoothly and efficiently. It is commonly used in various power transmission applications where two shafts are relatively close together and require a reliable coupling to compensate for misalignment.
In vertical shaft orientations, the Oldham coupling can handle axial misalignment, which is the misalignment between the rotational axes of the two shafts. This makes it suitable for applications where the connected shafts are not perfectly aligned due to gravitational forces or other factors.
The Oldham coupling’s ability to accommodate misalignment in both horizontal and vertical shaft orientations makes it a versatile choice for a wide range of mechanical systems, including pumps, compressors, conveyor systems, and more. However, it is essential to ensure proper installation and maintenance to maximize the coupling’s performance and service life in any shaft orientation.
Transmission of Torque in Oldham Couplings
An Oldham coupling is designed to transmit torque between two shafts that are misaligned but parallel to each other. It consists of three components: two hubs (also known as drive hubs) and a center disc. The hubs are connected to their respective shafts, while the center disc sits between them.
The center disc of the Oldham coupling is characterized by slots or keyways on its opposite sides, which engage with the hubs. The slots allow the center disc to slide or float within the hubs while maintaining a constant angular velocity between the shafts.
When torque is applied to the drive hub on one side, it induces a rotational force on the center disc. This rotational force is then transferred to the other drive hub, which results in torque transmission to the second shaft. The center disc acts as an intermediary between the two hubs, compensating for any axial or radial misalignment between the shafts.
Regarding the question of different shaft diameters, the Oldham coupling can accommodate shafts with different diameters as long as the hub design allows for a secure connection. The keyways or slots in the center disc and hubs should be compatible with the shaft dimensions to ensure proper torque transmission and to prevent slippage or damage.
It is essential to select the appropriate size and design of the Oldham coupling to match the shaft diameters and to ensure reliable torque transmission while accommodating any misalignment between the shafts.
editor by CX 2023-08-18