how to measure hydraulic cylinder?

To measure a hydraulic cylinder, you will will need a couple of essential instruments these kinds of as a tape measure or calipers. In this article are the ways to evaluate a hydraulic cylinder:

one. Figure out the Size: Measure the general size of the cylinder by measuring from the center of one particular mounting hole to the center of the reverse mounting hole. This will give you the stroke length of the cylinder.

2. Measure the Bore Measurement: The bore dimension refers to the interior diameter of the cylinder barrel. It is significant to measure the bore precisely as it determines the force and capacity of the cylinder. Use calipers or a micrometer to measure the diameter of the cylinder bore. Assure that you measure across the middle of the cylinder bore and not the worn or damaged spots.

3. Evaluate the Rod Dimension: The rod dimension refers to the diameter of the piston rod. Measure the diameter of the rod utilizing calipers or a micrometer. All over again, measure throughout the centre of the rod and not any worn or broken places.

four. Measure the Rod Length: Measure the size of the piston rod from the middle of the piston to the close of the rod.

5. Test Mounting Type: Note the mounting fashion of the cylinder, regardless of whether it is flange-mounted, clevis-mounted, or other varieties. This information and facts is essential when replacing or picking out a cylinder.

6. Test Seal Kind: Discover the type of seals made use of in the cylinder, these types of as piston seals, rod seals, or wiper seals. This info is essential when purchasing replacement seals.

It is significant to measure hydraulic cylinders correctly to guarantee appropriate fit and functionality. If you are doubtful or require support, it is recommended to consult the manufacturer’s documentation or China hydraulic cylinders supplier seek aid from a China hydraulic cylinders supplier expert to be certain precise measurements and right alternative.